Through the striking combination of a cylindrical main body and angular water spout, HANSASTELA makes for an interesting contrast at the washbasin. The slight forward slant of the fitting body with its pin lever, characteristic for this series, lends an especially dynamic appearance to the faucet. Other variants also cut an elegant figure at the washbasin through their upright body and the spout right at the top.
The touchlessly operated variant of the HANSASTELA makes the ideal marriage between functionality and form. With its reduced design and synthesis of round and angular shapes, the electronic fitting adds a stylish flair to a wide range of furnishings.
Thanks to the state-of-the-art sensor technology, the water only flows when it is actually needed – and then economically at a rate of only six litres per minute.
- Powerful design: A contrast-rich design language that goes with a wide range of interior design styles.
- Touchless electronic operation.
- Maximum convenience: plenty of room for the hands and touchless operation if desired (electronically controlled – infrared).
- Conserves water with only 6 l / min.
The fitting can be opened and closed in the classic manner using the operating lever at the top.
The faucet is opened and closed by means of the operating lever at the side. This ensures that not a drop of water falls onto the fitting, so it stays hygienically clean for longer.
The fitting, either battery or mains operated, is controlled electronically and features individual functions.
Touchless faucets are operated without the need to move a lever. The water begins to flow as soon as your hand gets close to the sensor, and it stops again when you take it away.
With exposed products, the fittings technology is installed on outside of the wall. Pipes and connections remain visible.
The body is installed directly on the wall rather than on the washbasin or sink.
A uniform design for the whole bathroom? That works well by means of the bathtub and shower fittings.
Rim-mounted fittings are installed directly on the rim of the bathtub rather than on the wall or free-standing.
With concealed products, a concealed element for mixing the water is installed in the wall. The connections and pipes disappear from view; only the control elements and the faucet spout remain visible.